Video Archives - Admix

Video: Safematic (Safe Unit) Installation and Operation

Written by James Crowell, Field Service Engineer If you have a Boston Shearmill, DynaShear, Fastfeed, PIC, Optifeed, Shearpump, MayoMill or Flowshear with double mechanical seals, we have a video that provides step by step instructions for the installation, adjustment, and operation of the John Crane Safematic (Safeunit) for these inline mixers. The Safematic device controls

Read More...

Video: Bearing Frame Rebuild

Written by James Crowell, Field Service Engineer We’ve developed a video with step-by-step instructions to assist your maintenance personnel with rebuilding your 125RX bearing frame for your two specific batch mixer models: the Rotomixx and the Rotosolver RXRS poultry mixer.  We recommend a preventative maintenance rebuild once every couple of years on average.  Performing this

Read More...

Video: Replacing DynaShear Seal

Written by James Crowell, Field Service Engineer Attention DynaShear customers! Admix seals are built to withstand tough applications and washdowns, but as with any seal, they wear over time. When that time comes and the seal needs to be replaced, you want downtime to be as minimal as possible so production can be resumed quickly. 

Read More...

The Importance of Shaft Straightening

Have you noticed some vibrations coming from your mixer?  Have you recently rebuilt your mixer?  If you answered yes to either question, it’s very important that you check shaft straightness. Shaft straightening is a crucial part of maintaining your mixer. Having a straight shaft helps to increase the life of other critical components of the

Read More...

We’ll Put You on the Straight and Narrow – Watch our New Training Video

Have you noticed some vibrations coming from your mixer? Have you recently rebuilt your mixer? If so, shaft straightness should be checked. Shaft straightening is an important part of maintaining your mixer. Having a straight shaft helps increase the life of other critical components of the mixer such as bearings. Shaft straightness should be checked

Read More...